View APT6038SLL_1211859.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

600V 17A 0.380
APT6038BLL APT6038SLL
BLL D3PAK
TO-247
POWER MOS 7
(R)
R
MOSFET
Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching (R) losses are addressed with Power MOS 7 by significantly lowering RDS(ON) (R) and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. * Lower Input Capacitance * Lower Miller Capacitance * Lower Gate Charge, Qg
MAXIMUM RATINGS
Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25C Pulsed Drain Current
1
SLL
* Increased Power Dissipation * Easier To Drive * TO-247 or Surface Mount D3PAK Package
D G S
All Ratings: TC = 25C unless otherwise specified.
APT6038BLL_SLL UNIT Volts Amps
600 17 68 30 40 265 2.12 -55 to 150 300 17 30
4
Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current
1
Volts Watts W/C C Amps mJ
(Repetitive and Non-Repetitive)
1
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
960
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) Drain-Source On-State Resistance
2
MIN
TYP
MAX
UNIT Volts
600 0.380 100 500 100 3 5
(VGS = 10V, ID = 8.5A)
Ohms A nA Volts
9-2004 050-7055 Rev B
Zero Gate Voltage Drain Current (VDS = 600V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 480V, VGS = 0V, TC = 125C) Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 1mA)
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
DYNAMIC CHARACTERISTICS
Symbol Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge
3
APT6038BLL_SLL
Test Conditions
VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 300V ID = 17A @ 25C RESISTIVE SWITCHING VGS = 15V VDD = 300V ID = 17A @ 25C RG = 1.6 6 INDUCTIVE SWITCHING @ 25C VDD = 400V, VGS = 15V ID = 17A, RG = 5 6 INDUCTIVE SWITCHING @ 125C VDD = 400V VGS = 15V ID = 17A, RG = 5
MIN
TYP
MAX
UNIT
1850 365 30 43 11 23 9 3 17 4 190 46 310 50
MIN TYP MAX UNIT Amps Volts ns C nC pF
Gate-Source Charge Gate-Drain ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy
ns
J
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol IS ISM VSD t rr Q rr
dv/ dt
Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage
1 2
17 68 1.3 400 6.0 8
MIN TYP MAX
(Body Diode) (VGS = 0V, IS = -17A)
Reverse Recovery Time (IS = -17A, dl S/dt = 100A/s) Reverse Recovery Charge (IS = -17A, dl S/dt = 100A/s) Peak Diode Recovery
dv/ dt 5
V/ns
THERMAL CHARACTERISTICS
Symbol RJC RJA Characteristic Junction to Case Junction to Ambient UNIT C/W
0.47 40
1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 s, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471
4 Starting Tj = +25C, L = 6.64mH, RG = 25, Peak IL = 17A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS -ID17A di/dt 700A/s VR VDSS TJ 150C 6 Eon includes diode reverse recovery. See figures 18, 20.
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.50
, THERMAL IMPEDANCE (C/W)
0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 10-5
0.9
0.7
0.5
Note:
PDM t1 t2 Peak TJ = PDM x ZJC + TC Duty Factor D = t1/t2
9-2004
0.3
050-7055 Rev B
Z
JC
0.1 0.05 10-4 SINGLE PULSE
10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
1.0
Typical Performance Curves
ID, DRAIN CURRENT (AMPERES)
50 45 40 35 30 25 20 15 10 5 0
APT6038BLL_SLL
VGS =15 &10V 8V 7V 6.5
RC MODEL Junction temp. (C) 0.201 Power (watts) 0.271 Case temperature. (C) 0.109F 0.00532F
6V
5.5V 5V
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
50 45
ID, DRAIN CURRENT (AMPERES)
VDS> ID (ON) x RDS(ON) MAX. 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE
0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS 1.40
V
40 35 30 25 20 15 10 5 0
1.30 1.20 1.10 1.00 0.90 0.80
GS
NORMALIZED TO = 10V @ I = 8.5A
D
TJ = +125C TJ = +25C TJ = -55C
VGS=10V
VGS=20V
0 1 2 3 4 5 6 7 8 9 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) FIGURE 4, TRANSFER CHARACTERISTICS
0
18 16
ID, DRAIN CURRENT (AMPERES) BVDSS, DRAIN-TO-SOURCE BREAKDOWN VOLTAGE (NORMALIZED)
1.15
5 10 15 20 25 30 ID, DRAIN CURRENT (AMPERES) FIGURE 5, RDS(ON) vs DRAIN CURRENT
14 12 10 8 6 4 2 0 25
1.10
1.05
1.00
0.95
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE (NORMALIZED)
50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE 2.5
I V
D
0.90 -50
-25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50
= 8.5A = 10V
2.0
1.5
1.0
VGS(TH), THRESHOLD VOLTAGE (NORMALIZED)
GS
0.5
0.0 -50
-25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 8, RDS(ON) vs. TEMPERATURE
-25 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
050-7055 Rev B
9-2004
68
OPERATION HERE LIMITED BY RDS (ON)
10,000
APT6038BLL_SLL
ID, DRAIN CURRENT (AMPERES)
Ciss
C, CAPACITANCE (pF)
1,000 Coss 100 Crss 10
10
100S
1
TC =+25C TJ =+150C SINGLE PULSE
1mS 10mS
1 10 100 600 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 10, MAXIMUM SAFE OPERATING AREA
I
D
0 10 20 30 40 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 11, CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE
IDR, REVERSE DRAIN CURRENT (AMPERES)
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
16
= 17A
200 100
12 VDS=100V 8 VDS=250V
TJ =+150C TJ =+25C 10
VDS=400V
4
10 20 30 40 50 60 Qg, TOTAL GATE CHARGE (nC) FIGURE 12, GATE CHARGE vs GATE-TO-SOURCE VOLTAGE 30 td(off) 25
0
0
1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE 60 50
td(on) and td(off) (ns)
20 15 10
V
DD G
= 400V
40
tr and tf (ns)
R
= 5
tf
V
DD G
T = 125C
J
L = 100H
30 20
= 400V
R
= 5
T = 125C
J
td(on) 5 0 10 0
L = 100H
tr 0 5 10
0
15 20 25 30 ID (A) FIGURE 14, DELAY TIMES vs CURRENT
V
DD G
5
10
15 20 25 30 ID (A) FIGURE 15, RISE AND FALL TIMES vs CURRENT 500
500
= 400V
R
= 5
SWITCHING ENERGY (J)
L = 100H EON includes diode reverse recovery.
Eon
SWITCHING ENERGY (J)
400
T = 125C
J
400 Eon 300
300
200
200
V
9-2004
Eoff 100
DD
= 400V
I
D J
= 17A
100 Eoff 15 20 25 30 ID (A) FIGURE 16, SWITCHING ENERGY vs CURRENT 0 0 5 10
T = 125C L = 100H EON includes
050-7055 Rev B
10 15 20 25 30 35 40 45 50 RG, GATE RESISTANCE (Ohms) FIGURE 17, SWITCHING ENERGY VS. GATE RESISTANCE
0
diode reverse recovery.
0
5
Typical Performance Curves
Gate Voltage
APT6038BLL_SLL
10 % TJ = 125 C td(on) tr 90% 5%
Drain Voltage Drain Current
90%
Gate Voltage T = 125 C J
td(off)
Drain Voltage
90% tf 10%
5% 10 %
Drain Current
Switching Energy
Switching Energy
Figure 18, Turn-on Switching Waveforms and Definitions
Figure 19, Turn-off Switching Waveforms and Definitions
APT15DF60
V DD
ID
V DS
G D.U.T.
Figure 20, Inductive Switching Test Circuit
TO-247 Package Outline
Drain (Heat Sink)
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC
D PAK Package Outline
4.98 (.196) 5.08 (.200) 1.47 (.058) 1.57 (.062) 15.95 (.628) 16.05 (.632) 13.41 (.528) 13.51 (.532)
3
15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
1.04 (.041) 1.15 (.045)
Drain
20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150)
Revised 4/18/95
13.79 (.543) 13.99 (.551)
Revised 8/29/97
11.51 (.453) 11.61 (.457)
0.46 (.018) 0.56 (.022) {3 Plcs}
4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055)
19.81 (.780) 20.32 (.800)
2.21 (.087) 2.59 (.102)
5.45 (.215) BSC 2-Plcs.
Dimensions in Millimeters and (Inches)
Source Drain Gate Dimensions in Millimeters (Inches)
APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
050-7055 Rev B
Gate Drain Source
5.45 (.215) BSC {2 Plcs.}
Heat Sink (Drain) and Leads are Plated
9-2004
0.020 (.001) 0.178 (.007) 2.67 (.105) 2.84 (.112)
1.27 (.050) 1.40 (.055) 1.98 (.078) 2.08 (.082)
1.22 (.048) 1.32 (.052)
3.81 (.150) 4.06 (.160) (Base of Lead)

▲Up To Search▲

Price & Availability of APT6038SLL

	To Download APT6038SLL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .